You are here

Gingway 2.0 Gallon Crack Filling Pour Pot

Popular Choice
Gingway 2.0 Gallon Pour Pot
List price: $189.99
Free Shipping to lower US 48
In Stock
Choose the quantity you would like to purchase
Have a question about this product? Ask it now!
Quick Overview: 
  • 2.0 Gallon Capacity
  • 18ga All Steel Construction
  • Built-In Stand
  • Made in USA


Filling asphalt cracks can be a messy job if your trying to pour the rubberized crack filler from a bucket or bottle and many times you will pour excess material on the surface which creates unwanted waste.

Using the Gingway handheld 2.0 gallon Asphalt Crack Filler Pour Pot is the easy way to apply Hot Rubberized Crack Filler or Cold Crack Filler into asphalt cracks.

We here at Asphalt Sealcoating Direct offer several ways to fill asphalt cracks depending on the application and a hand-held pour pot is one of several excellent methods for making it happen.

The Gingway handheld Pour Pot features stand up design, fingertip control valve, and heavy-gauge steel construction and will hold 2.0 gallons of hot crack filler or cold crack filler. It also includes a 1-inch to 1/2-inch 90º elbow and 1/2" to 3/8" straight reducer, giving you several preferences on how much flow you want out of your pour-pot.

This 2.0 Gallon Crack Filler Pour Pot is designed to be used with one of our Flex Kettles making it very quick and easy to refill.

In the hands, the Gingway pour-pot feels sturdy. The welds look really good and professional when compared to the competition. The plunger feels really good when dropping it into the funnel opening and the rod feels straight because the whole actuation system is well guided.

In addition to the built-in stand-up base, you'll find a small notch in the handle bracket and a small rod protruding from the plunger rod. This makes it so you can hang up or store the pour-pot with the plunger in the open position if that's how you prefer.

To use a pour pot like the Gingway 2 gallon, simply pour melted hot or cold applied crack fill into the handheld pour pot and follow the crack keeping the funnel approximately 2" to 4" from the pavement surface, dribbling crack fill into the crack as needed to slightly overfill the crack.

After using our asphalt crack filler pour pot, use an Asphalt Crack Squeegee to trim and smooth the new crack filler as needed creating a band of new rubber about 3" wide which will seal the crack from moisture and dirt.

Sand can be sprinkled on the wet joint to add adhesion as well as to "Dull" the new rubber so the repaired crack blends in with the existing asphalt pavement. (This is optional)

Read more on Filling Asphalt Cracks and choosing the correct Asphalt Crack Cleaning equipment and Asphalt Tools for this job.

Clean-up is easy, simply heat the pour pot with a torch and melt away built-up rubber allowing it to drain out the orifice.

*Shipping offer applies to customers in the North 48 Continental USA States only. Please call us for details if you live outside this area.


  • Works With Hot Or Cold Crackfiller

  • 3/8" Orifice Included

  • Includes Stand


  • Buy as a package of 6 for extra savings. Great for contractors and larger crews.

You Might Like




2.0 Gallons

Move Style


Material Handling

Hot or Cold



18ga Steel

Primary Orifice


Reducer Orifice


Unit Specifications

Net Weight

8.2 lbs


10"L x 10"W x 29.5"H

Package of 6 Shipping Dimensions

25"L x 19"W x 29"H

Package of 6 Shipping Weight

57 lbs

Frequently Asked Questions

How Do You Clean A Pour Pot, Bander or Melter Applicator?

The answer to this depends on the type of material you're using: Hot Crack Filler or Cold Pour Crack Filler

Hot Crack Filler
If you're using a hot applied crack filler and filling the applicator using a stationary melter, then your best bet is to have a plumbers torch on hand (sold at your local hardware store) and burn off any rubber that might have built up during use or caused moving parts to seize up. Pour pots, for example, will sometimes have the valve freeze up between uses. Simply heat up the left over rubber and this will free up the valve. We recommend draining these units of all rubber after the job is done and burn off any excess rubber ahead of time to make sure you're ready to go for the next use.

Cold Pour Crack Filler
Cold pour crack fillers are generally water based products which means you can easily just clean up with lots of clean water. In some cases, you might find a cold pour crack fill that is made from petroleum-based products and these will require a cleaning agent such as mineral spirits or toluene. All of the cold pour crack filler we sell are water based so cleanup is super easy.

Shipping Weight
Weight: 9 lb
Shipping Dimensions
Dimensions: 9.5 in × 9 in × 28 in