You are here
1 inch Sealcoating Tank Agitation Shaft Flange Bearing F205
- Flange bearing for straight pipe/rod applications
- Accomodates upto exactly 1" pipe or rod
- Allows for a small degree of off center installation
- Two set screws for a 3 point fastening contact
Looking to replace the shaft bearings on your BIGA sealcoating tank?
The F205 is a 1-inch diameter flange bearing that works great for end-to-end rotating shaft needs like the agitation of sealcoating tanks. If you've purchased one of our BIGA tanks in the past and need a replacement, these are the ones we use and will bolt up without a problem.
If you're making your own agitation shaft for your own DIY project, we recommend looking at the 1" shaft kit which includes 2 bearings, 2 gaskets and 2 mounting backplates.
For maintenance, we recommend greasing the bearings at least once per year through the installed grease zerk, and they should last just fine for a long time.
Included is the cast-iron flange and pre-installed UC type bearing.
While this is advertised as a sealcoating shaft seal bearing, this part can be used in a wide variety of industrial applications.
Mounting hardware not included.
Note: Brand of manufacture may vary.
1" Flange Bearing Rubber Gasket Seal
Cast iron bracket
UC style bearing that roates within the flange bracket
Includes grease zerk for easy maintenance
Two 120º offset set screws create a 3-point contact
You Might Like
Shaft OD Diameter (max)
Flange Bolt Diameter
Flange Bolt Center Spacing
Part Compatibility List
1" Shaft Flange Bearing F205 is compatible with the following product(s).