You are here
Falco 4 Ton Asphalt Hot Box Trailer for Hot or Cold Patch Asphalt
- 4 Ton Capacity Trailer
- Perfect for small municipalities or serious contractors
- Fully insulated to keep asphalt hot
Our professional Asphalt Hot Box is our premium 4 Ton Trailer System that offers the most demanding Pavement Repair Professional all of the needed features and quality he would expect for preparing hot or cold asphalt patch.
This asphalt hot box system is fired from a 105,000.00 BTU diesel fired burner with an automatic safety shut off. The hot box burner is protected by a removable safety hood that can be easily removed for burner service and inspection.
The automatic temperature control is adjustable from 0 to 350 degrees and the burner has a built-in fuel pressure monitoring gauge to keep your hot asphalt patch at the right temperature.
This is a Triple Wall Fully Insulated Hot Box which will keep your hot asphalt patch hotter longer in cold weather, and the three position shoveling door is insulated as well.
The extra large door is 33 inches wide and 18 inches tall and incorporates Full Hopper access and is 26 inches off the ground with a heated worktable.
This asphalt hot box system will heat both Hot and Cold Mix Asphalt Patch and includes a handy built-in solvent tank, sitting on top of a tandem axle trailer with GVWR of 7000LBS with slipper Spring Suspension.
Our 2 Ton Asphalt Hot Box is also ideal for larger contractors but fills the need of mid sized municipality's as well, looking to patch asphalt in roads and parking lots.
We offer several options of Asphalt Patcher to fit your specific need.
Triple Wall, Insulated
Auto Temp Control
Steel Insulated Material and Loading Doors
Two 7K 8-bolt Axles
8 x 14.5 Tires
Automatic safety shut off
Automatic temperature control
Built-in solvent tank
Fully insulated hopper
Triple wall fully insulated box
Floor and all four walls are heated
10 gauge capping channel and corner molding add structural integrity to the hopper preventing it from going out of square
All wiring is external to the hopper
Unit is first sandblasted then painted with two coats of epoxy primer and urethane finish
You Might Like
Diesel or Propane
12 Volt Battery
4 Ton GVWR of 14,000 lbs
10 ga Steel
16 ga Steel
16 ga Steel
One Piece, Seamless, Ceramic
Tandem - Slipper Leaf Spring Axles
Electric & Safety Breakaway
2” x 6” x 3/16” Rectangular Steel Tubing