You are here
Asphalt Pothole Repair Patch (Bulk Pallet)
- Cold asphalt patch for pothole repair
- Bulk quantity saves you money
- Pallet of 63 bags totaling 3150 lbs
- Each bag weighs 50 lbs
Asphalt Pothole Repair for driveways and parking lots is quick and easy using our system and instructions!
If you own an asphalt sealcoating company, a home with an asphalt driveway or a business with a parking lot, Asphalt Pothole Repair will be an important part of your business.
We recommend "POT HOLE PATCH" Permanent Pavement Repair Material because of its ease of use and application when filling potholes in your asphalt driveway or parking lot.
This product is a polymer-modified cold asphalt guaranteed to permanently repair potholes, utility cuts, overlays, and edge repairs in asphalt or concrete parking lots and driveways.
Not only does Pot Hole Patch Permanent Pavement Repair Material work in ALL weather conditions, it even works in water.
Our Permanent Pavement Repair Material cold patch asphalt is easy to apply and requires no mixing or tack coat.
Simply sweep the area of your driveway or parking lot needing a pothole patch, fill the area with our Permanent Pavement Repair Material cold patch asphalt and compact with a shovel or Asphalt Tamper It really is Permanent!
- Works in Water and ALL Weather Conditions
- Potholes, Utility Cuts, Overlays, Edge Repairs, etc.
- Consumer Lab Tested and Approved
- No Mixing, No Tack
- 50 LB Bags
- Stockpiles for Months
Our Permanent Pavement Repair Material is the high-performance asphalt patching material that is easily applied any time of the year, under any weather conditions.
This product has been tested and refined to the point where it is now the worldwide standard.
High Performance = Cost Effectiveness
- Saves time and money. Since over 90% of all holes patched with our pothole patch
- Never need patching again, money is not poured into the same holes repeatedly!
- Is quick and easy to apply, with no special or expensive equipment required.
Asphalt Pothole Repair application:
Proper preparation here is the key to really good results. Cut out the loose asphalt using a saw or chisel. Remove all loose material.
- Just sweep the area of your parking lot or driveway to be repaired, removing loose debris.
- Shovel or pour UPM into the hole.
- Compact the patch using a tamper and it's ready for traffic.
For even better results, when performing asphalt pothole repair Blow out and preheat the pothole. This cleans and preheats the surface, etching it and preparing the pothole for excellent adhesion. If you are patching potholes as a professional contractor business, we recommend heating the damaged area with one of our infrared asphalt heaters
Using a tamper will be the fastest and easiest way to tamp the new fill into the pothole. If you perform pothole patching repair as a professional contractor, you might also consider one of our asphalt compactors which will mechanically compact the asphalt aggregate to create an even stronger surface. Using a regular vibrating plate compactor is great for quickly compacting the pothole patch material. However an asphalt roller compactor is best for smoothing the pothole patch to help match the grade of the parking lot or driveway you are working on, leaving a clean and professional looking repair job.
No more need to run back and forth to the "Hot Mix" plant, just carry this product with you and you will save yourself time and make more money too :)
It's all about being able to offer your customers added value by offering to perform Asphalt Pothole Repair while your there filling cracks.
This just adds to your bottom line!
There are 63, 50 lb bags per pallet, approximate weight is 3150 LBS
Easy-to-use and low labor cost
Does not need primer or heat (primer recommended for a better application)
Sticks to wet or dry, asphalt or concrete surfaces
Product can be sealcoated over immediately
You Might Like
Bags per Pallet
Single Bag Weight
Total Pallet Weight
10 lbs. covers 1 sq. ft. at 1" depth