ASD275: Portable Sealcoating Spray System
ASD275: Sealcoating Spray System
Our ASD275 Sealcoating Spray System is perfect if you just want to apply asphalt sealcoat yourself or just starting you asphalt sealcoating business.
Watch this system in action
If you need more information regarding sprayer options,you may want to read Asphalt Sealing System Options to help you understand the differences in equipment selection.
This Sealcoating Spray System incorporates a 275 gallon polyurethane tank on a steel skid making it very durable and the wrap-around safety cage protects the tank from potential damage.
We build this sealcoating spray system for quick set-up and break down by using quick disconnecting hoses which allows you to easily clean and store your sealcoating sprayer.
Our ASD275 seal coat sprayer system uses our Sterling industrial Pump and hose configuration and creates the same professional results that our larger systems create.
Mixing and agitation occurs by pumping sealcoat liquid from the bottom of the tank to the top of the tank at 150 to 190 Gallons per minute depending on engine RPM.
Recirculation first occurs through the high volume of liquid moved by the pumps cast iron impeller. Secondary mixing takes place when the sealcoat liquid is discharged back into the top of the tank.
You will also receive our "Easy Clean Strainer" assembly as well.
Some similar systems use a "Strainer Basket" on the discharge Port as the sealcoat re-enters the tank. We have found that this design is better than not having a strainer but as it clog's and fills with debris, it can back up the pump head pressure which will likely lead to pump failure.
When the strainer is installed in the Suction port, it will only drop the pump pressure as the strainer fills and with our design, it's very easy to clean as necessary.
Read more about the importance of Sealcoat Strainers
The only moving parts in this sealcoating spray system is the Sterling pump. All other parts are standard hardware items making it easy to keep your sealcoating sprayer in service.
Our pump is powered by our Sterling industrial 6.5 HP OHV pump, this is truly the best of the best in heavy liquid transfer pumps. We use a cast iron impeller with a mechanical Viton impeller seal making the pump easily repairable in the field.
Many pumps of this style are not repairable and use plastic parts. An all metal pump is a very important consideration if your mixing sand with your sealcoat.
in the unlikely event you should ever need a new shaft seal, we will include an extra seal with your purchase of this sealcoating sprayer system, allowing you to quickly get your pump pumping again!
Please read our "Sealcoating Application" for specific instruction on application.
Fact: The OHV valve design chosen for this equipment design is the preferred design because of the durability and increased torque compared to other engines.
This sealcoating sprayer tank can be permanently mounted to any truck bed or trailer using simple U-bolts.
See more Sprayers at Sealcoating Equipment Direct.Com
ASD275 F.A.Q. & Specification Information:
- Pump operates at 150 GPM recirculation (up to 190 GPM)
- (full tank recycles entire contents about once every two minutes)
- 30-65 psi is delivered at spray wand (depending on pump idle speed and product viscosity)This is the ideal pressure range for reaching the proper spray dispersal of sealcoating liquid.
The 1/2" steel spray wand includes a brass ball valve. Our Sealcoating Sprayer Wand uses standard ¼ inch stainless steel spray tips (included) and we also include 50ft of high quality 200 PSI chemical resistant 3/4 inch diameter hose.
Contact Us today for optional attachment quotes
Also, please read our How-To Guide on: How To Sealcoat Spray Application Guide
*Note: Tank style may vary
and some assembly required
