You are here
275 Gallon IBC Tote Mixer
Save time and energy by using a 275 gallon tote mixer to stir sealcoat sealer or anything else that needs mixing in a 275 gallon IBC tote with the standard 6" fill hole.
Made from an all metal construction, simply insert the shaft into a drill and mix with ease!
Our 275 gallon tote mixer has a ribbon style paddle that helps create a vortex style of material flow, and this results in a larger area of product being stirred for maximum efficiency. This product is slightly larger in diameter than our 5 gallon bucket mixer and it has an additional rod welded to the end, extending it to the proper length for mixing a 275 gallon tote.
This mixer is the exact same style of mixer used by our BIG A Asphalt Emulsion plant, to keep sealcoat and crack filler material mixed up in 275 gallon totes. Despite it's small size, the vortex ribbons do the job to mix these large containers.
Drill Chuck size: 1/2" or larger
Overall length: 45-1/2"
Caution: This product has not been approved for food grade materials.
We recommend that you have a fairly decent drill with plenty of torque to use this tote mixer with any of the BIGA products in case the solids in the material have settled. That said, don't go out and buy a drill because we gave you a warning, try what you have and if it struggles, go find a beefier one.
Most drills that can handle a 1/2" chuck are already pretty beefy so chances are, what you have will work just fine. If you're working with products other than the BIGA sealers, drill requirements will all depend on how thick or thin the material being mixed is.
As a general common sense disclaimer: We won't be held responsible for burned up, underpowered drills.
You Might Like
Drill Chuck Requirement
1/2" or larger