COLOR/TYPE | SKU |
|---|---|
White (glass beads) | 8430566 |
White ViziGrip | 8430566HS |
Yellow (glass beads) | 8430566Y |
Yellow ViziGrip | 8430566YHS |
You are here
PreMark 24 inch x 3 foot Preformed Thermoplastic Intersection Stop Line 8430566
MPN:
8430566
SKU: 8430566
Ordering by Phone? Make sure you have the right product. Check the Product SKU List below.
PreMark 24" x 3' Preformed Thermoplastic Intersection Stop Line
Quick Overview:
- Preformed with no pre-heat
- Great for the vehicle stop line at intersections
- Package of 5 panels each 24" wide x 3' long and 125 mils thick
Recommended For
Commercial 
Contractor 
Government 
Educational 
Airport Description
PreMark® Preformed Thermoplastic products made by Ennis-Flint are top pick products within the thermomarking industry and do NOT require any pre-heating prior to installation. Simply place, heat and go.
PreMark is a heavy-duty preformed thermoplastic that is a very durable "intersection grade" pavement marking material. There are no minimum requirements on the ambient or road temperature requirements which allows pavement marking season to extend into the colder months.
The top surface of the material has regularly spaced heating indicators which provide a visual cue during application that the material has reached a molten state. This tells you when proper adhesion and bead embedment has been achieved. The heating indicators also provide a post-application visual cue that you installed it correctly and ready to move on.
Choose between White or Yellow colors and get 24" wide by 3' long lines for asphalt or concrete*. These lines are designed for intersections where a 24" car stop width is required.
Shipped as a precut, ready-to-use package of 5, you get 15 linear feet of 24" material each at 125 mils thickness.
*Concrete requires pre-sealer before applying thermoplastic.
Do You Need Sealer?
Preformed Thermoplastic, while a great product, is still susceptible to contaminants and moisture that can prevent the preformed marking from sticking properly to the pavement. There are times when a sealer is required and times when sealer is recommended. Let's cover the different scenarios so you can be confident in whether you need a sealer for your next project.
Pavement Type
Concrete: If you're applying a preformed marking to concrete, you must use sealer no matter what kind of marking you are using. Concrete traps moisture and contaminants like salt, that will seep to the surface and could eventually cause the marking to pop loose. If you're applying a preformed marking to concrete, always use a sealer.
Asphalt: Asphalt can go either way. If the asphalt is new and the top layer still contains the asphalt oils, then you don't need a sealer but if you want to throw caution to the wind, it won't hurt anything if you do. However, if the asphalt is old and oxidized, then you do need a sealer. If you're installing a multi-color marking on asphalt, it is highly recommended that you use a sealer, regardless of the asphalt age.
Product Links
2-Part Sealer Kit View Product
2-Part Sealer Gun View Product
Do You Need ViziGrip?
Unless otherwise noted, all PreMark thermoplastic markings come standard with glass beads embeded in the preformed template. If you need an anti-skid marking in addition to glass beads, you can choose to purchase the ViziGrip version.
ViziGrip® stands for "Visibility with Grip" and is a ready-made product from the factory that has glass beads along with a traction anti-skid aggregate.
ViziGrip is ideal for crosswalks where foot traffic is present, bike lanes where folks are riding over bike markings or for general markings where skidding might present a liability or be less than ideal and the best part, you can order it at no additional cost!
PreMark Full Product List
Looking for a preformed marking we don't have listed? Check out a PDF of the full product list that can be purchased over the phone +1(800) 689-2098 View Full product List
Standard Colors
White
Yellow
Product SKU List
These are the SKU numbers to give if you plan to buy over the phone. To see pricing changes (if any), click on the "drop down" arrow in the Add to Cart section above.
Features
Complies with MUTCD; used primarily for regulatory markings on public streets and highways and private properties
Lasts 6 to 8 times longer than paint
Retroreflective; glass beads mixed throughout material so that as marking wears new beads exposed
Clean, crisp appearance
Quick and simple mobilization; no heavy equipment to set-up and clean
Made at ISO 9001:2008 certified facility
No lead chromate or VOCs
Simple 3-step application process with an approved thermoplastic heater.
You Might Like
Specifications
General
Individual Dimensions | 24" wide x 3" long |
Case Quantity | 5 |
Total Coverage | 30 linear feet |
Glass Beaded | Yes |
Thickness | 125 mils |
Federal Requirements
Material Standards | Conforms to AASHTO designation M249 |
Glass Bead Standards | Conforms to AASHTO designation M247 |
White & Yellow Color Standards | Meets FHWA Docket No. FHWA-99-6190 Table 5 and Table 6 |
Retroreflectivity Standards | In accordance to ASTM E 1710 |
Documents
Brochure:
Material and Safey Data Sheets (MSDS/SDS):
Shipping Weight
Weight: 38 lb
Shipping Dimensions
Dimensions: 40 in × 26 in × 3 in