5 Gallon without sand
5 Gallon with sand
You are here
J-16 5 Gallon Professional Asphalt Coal Tar Sealer
- Professional grade sealcoat sealer
- Comes in convenient 5 gallon bucket
- Perfect for driveways and smaller jobs
- Resistant to weather and chemical wear
ASD Coal Tar Asphalt Driveway Sealer is specially designed for residential asphalt driveways.
Beware of inexpensive, watered-down, discount store sealers. The best looking, longest lasting off-street asphalt pavements are protected with ASD ADVANCED FORMULA J-16 Driveway Sealer.
Unlike most sealers, it keeps natural elements, de-icing salts and automobile deposits from penetrating asphalt. Gas and oil can't eat it away. The sun can't dry it out. Winter moisture can't seep in, freeze and rip it apart.
Also, summer rain can't erode the foundation. The Advanced Formula J-16 Driveway Sealer extends pavement service life and makes pavements easier to clean. This unique, premium quality formulation lets you do it yourself with no costly mixing equipment. Easy-to-follow application directions are printed on every container.
Application: Use hand squeegees or brush applicators. Brush applicators are best on extremely smooth or rough open-textured surfaces. A previously unsealed driveway or one in marginal condition may require 2 coats of J-16 Driveway Sealer.
J-16 DRIVEWAY SEALER is available in two (2) grades:
- Plain (no sand)
The best time to use the Sand-Filled coal tar sealer, is on the first coat over new asphalt. This is great for moderate to heavy traffic areas because it allows for extra wear and it also provides additional traction where slip resistance is needed. The second and final top coat can be either Sand-Filled or Plain (No Sand -> Recommended).
Coverage: Quantities required will vary with porosity and texture of pavement surface, but general ranges are as follows:
- Home Driveways
- Play Areas
- Parking Stalls
- Bicycle and Golf Car Paths Etc.
1st COAT J-16: 60 - 90 sq ft per gallon | Sand: 2 lbs / gallon
2nd COAT J-16: 90 - 112.5 sq ft per gallon | Sand: None
- Parking Lots
- Airfield and Highway Shoulders
- Service Station Aprons
- Steep Grades
1st COAT J-16: 75 - 90 sq ft per gallon | Sand: 2 lbs / gallon
2nd COAT J-16: 75 - 112.5 sq ft per gallon | Sand: None
ASD Asphalt Driveway Sealer is designed for residential asphalt driveways and will keep your driveway looking like new and greatly extend the life of the asphalt.
*Also available is 55 gallon drums and 275 gallon totes.
Product SKU List
These are the SKU numbers to give if you plan to buy over the phone. To see pricing changes (if any), click on the "drop down" arrow in the Add to Cart section above.
Perfect for: LOW TRAFFIC, Home Driveways, Play Areas, Parking Stalls,Bicycle and Golf Cart paths
Extends pavement service life
Excellent resistance to fuel and oils
Calculate the Amount You Need:
You Might Like
Coal Tar Emulsion
Weight Per Gallon
10 lbs (12 lbs with sand)
Finish / Color
Extreme (wear protection)
None to Minimal
70 - 100 sq ft
350 - 500 sq ft
Actual coverage will vary depending on texture and condition of the asphalt.
Dry to Walk
3 - 6 hours
Dry to Drive
24 - 36 hours
Actual dry times will vary depending on ambient temperature, humidity and wind conditions.
Spray or Squeegee
Recommended Max Dilution
5% (Apply undiluted for best performance)
With Sand / Without Sand
Minimum Application Temp
Above freezing (32º F) for 24 hours
Recommended Application Temp
50º F or higher
Cleanup (liquid state)
Soap & Water
Can Not Freeze (Recommended 50º F or above)
Avoid Excessive Heat
6 - 8 months
Stir well after opening