You are here
Iwaki Air 2 Inch Aluminum Multi-Spray Wand Sealcoat Pump - TC-X501AN-NPT
- 2" Aluminum Dual Diaphragm Pump
- Ideal for medium to large sealcoating rigs
- 1-year limited warranty
- Up to 206 GPM
- Air Powered (air source sold separately)
Looking for a multi-spray wand sealcoat pump? If you're in the market for a great multi-spray air-powered diaphragm pump that can be used all day, this ARO pump is a great place to start.
This 2" air-operated dual diaphragm (AODD) pump is great for medium to large sealcoating setups where a 500+ gallon tank is used and the ability for two or three guys to spray at the same time is necessary. We offer the ARO pumps as an alternative to the comparable Yamada pumps that come standard on our sealcoating spray systems.
Designed and made in Japan for over 50 years by the well-known YTS Pumps, Iwaki Air is the brand of YTS Pumps used to identify their air-operated pumps.
With part number: TC-X501AN-NPT, you get a 2" aluminum body (NPTF) and aluminum manifold. The seat material, ball and diaphragm are all Buna-N (Nitrile) material.
2" air-powered sealcoating pumps are perfect for multi-spray sealcoating rigs where medium and large asphalt parking lots will be sprayed. For an air-compressor supply, we typically recommend a minimum of a 30-gallon compressor that can average around 90 CFM.
The biggest benefit to a 2" air-powered diaphragm pump is the high flow rate that can be achieved which tops out at 172 GPM.
Or, check out the Yamada 2" pump as a great alternative with similar specs.
You Might Like
Intake & Discharge Size
2" Female NPT
Wet Side Material
Air Side Material
Air Supply Pressure
29 - 125 PSI (0.2 - 0.85 MPa)
Max Output Flow
206.1 GPM (water)
Approx 24 CFM @ 90 PSI
Yes (asphalt emulsion, coal tar, etc)
Yes (sand, coal slag, slate, etc)
18.03”L x 14.96"W x 26.89”H
70 lbs (34 kg)