High-Velocity Heat Lance (where appropriate, w/40' hose)
High-Velocity Heat Lance (where appropriate, w/60’ hose)
You are here
Crafco High-Velocity Hot Air Heat Lance For Professional Asphalt Crack Torch - 45650
Ordering by Phone? Make sure you have the right product. Check the Product SKU List below.
- High Temp, High Velocity, Flameless Heat Lance
- Heat range from 400º F to 2600º F
- Includes wheel kit, 40' hose and more...
The Crafco Hot Air Heat Lance is a high-temperature, high velocity, flameless crack torch that will easily remove vegetation and flash dry moisture from the pavement allowing the operator to seal cracks much faster.
It also allows for superior adhesion of new hot pour sealer because the asphalt crack is flash heated and etched. It delivers up to 3000 Ft velocity per second and has a heat range variation from 400 degrees to 2600 degrees.
This Heat Lance made by Crafco is ideal for the preparation of pavement cracks, potholes, and distressed pavement surfaces for repair. It features separate valves which control the mixture of fuel and compressed air at the point of combustion.
The Crafco hot air lance crack torch comes standard with a wheel kit, a 40' hose, LP gas regulator, air regulator gauge, water separator, standard Chicago tank fittings, and abrasion wrap with quick connect fittings.
Note: This lance requires a separate air compressor and propane fuel source.
Product SKU List
These are the SKU numbers to give if you plan to buy over the phone. To see pricing changes (if any), click on the "drop down" arrow in the Add to Cart section above.
Stainless steel construction
3000 ft velocity per second
Choose between 40' or 60' included hose
Liquid Propane gas regulator included
Air regulator gauge included
Water separator included
Wheel kit included
400ºF - 2600ºF
Exit Air Velocity
Up to 3000 ft per second
10 lbs per hour @20 PSI
5 - 30 PSI
Compressed Air Requirements
60 - 100 CFM