You are here
Crafco HP Asphalt Cold Patch Half Pallet For Cold Asphalt Repairs 34977
- Half pallet with 30 bags totaling 1,500 lbs
- Cold patch for asphalt pot holes and asphalt repair
- Approved as a high-performance patch material in most states
Crafco is a leading name in the asphalt industry and we're proud to offer their premium HP Asphalt Cold Patch for asphalt repairs.
Whether it’s repairing utility cuts or patching reoccurring potholes, HP Asphalt Cold Patch is rapidly becoming the material of choice. When hot patch isn't readily available or a quick fix is needed, the HP Asphalt Cold Patch is a fantastic alternative to repair an area of asphalt and does a much better job compared to the competition.
Designed to be used in a wide range of temperatures an climates, the HP Asphalt Cold Patch is a great product to have on hand for those quick jobs and situations that always seem to pop up when you least expect it. HP Asphalt Cold Patch is approved as a high-performance patching material in most states and other user agencies within the United States.
HP Asphalt Cold Patch is permanent, fully guaranteed against any failure, comes in an easy-to-open bag, and most important, does the job right the first time.
Sold as a half pallet of 30 bags with 50 lbs in each bag, making it perfect for medium repairs or having on-hand for the ocassional job.
Works in all weather conditions; wet, cold or hot
Approved, used and tested by utilities and states nationwide
Easy to use bags prevent waste and saves money
No mixing, mechanical compaction or tacking
Cost effective with no messy clean-up or time constraints
Permanently adheres to asphalt, concrete or steel
Perfect for bridge, drain, utility cuts and cutter work
Patch will not release, eliminates milling before re-paving
Use at any temperature, or in any weather condition
Open to traffic immediately - no raveling or rutting
No heating, mixing or tacking required
Permanent, no milling or patch release - ever
Remains pliable from at below freezing temperatures
Adheres to concrete, steel and asphalt in wet and bitter cold, snow or summer heat
Bags per Pallet
Weight per Bag
Coverage per Bag
.33 cubic ft (1' x 1' x 4" OR 2' x 2' x 1")
9.9 cubic ft
Asphalt / Concrete Repair (see HP Concrete Cold Patch for use on concrete repairs)
Total Bags Needed
2' x 2'
2' x 2'
2' x 2'
3' x 4'
3' x 5'
3' x 3'
Clean out the pothole or area to be repaired. Remove all loose debris and clean and square the edges, if possible. Larger potholes, or utility cuts, should be filled in no more than 2" lifts, using HP Asphalt Cold Patch. Compaction of each 2" lift of HP is highly recommended. In some soil conditions, it may be necessary to place sufficient material to form a 1/2" crown to allow for latent compaction by traffic. (In soft sub-base conditions, settlement may occur and additional HP can be added later to bring the repair to level with the existing pavement surface.)