You are here

Bon V Squeegee Black Neoprene Single Replacement Blade 19-136

2023 Notice: While supply chain problems are better than last year, we anticipate them to continue for 2023. Please expect some delays. view details

Overview of the Bon low temp black neoprene v-squeegee replacement blade
SKU: 19-136
Bon | Low Temp Black Neoprene | V-Squeegee Blade | Single
No Longer Offered
Have a question about this product?Ask it now!
Quick Overview: 
  • Great for cold pour crack material
  • OEM black neoprene replacement rubber
  • For temperatures below 180 degrees F
  • Sold as single quantities


We no longer off this as a single quantity. Please see Bulk Contractor Replacements for purchase


Want to save some money? Buy the replacement squeegees for your Bon v-squeegee instead of buying a whole new tool.

This is the rubber replacement blade for the Bon asphalt crack v-squeegee.

These replacement blades are a block style low temp black neoprene rubber designed for temperatures up to 180 degrees and fit the Bon Push / Pull crack v-squeegees.

The black neoprene rubbers are great for cold materials but not recommend for hot pour crack fillers.

Sold as single quantities.

Frequently Asked Questions

Can I use the black neoprene squeegee with hot crack filler?

The short answer is yes. The long answer is you will throw your money away faster if you only use the black neoprene squeegees. They are generally rated between 180 and 220 degrees F and your typical hot pour crack filler is put down around 325 - 375 degrees F. The neoprene wears out faster becaues the bottom will split over time if you have guys that don't take care of them.

Compared to the red silicone blades, you don't have the split problem so they last longer which saves you money in replacing not only the blades themselves, but the labor it takes to replace the blades. The other problem with using hot materials on the black neoprene is that it becomes a lot more difficult to remove the rubber from the blade for cleaning. The dried, cooled rubber peels right off of the red silicone blades but sticks to the black neoprene. Cold pour crack fillers on the other hand are usually water-based so washing off the left-over material from black neoprene is no big deal.

If you're doing hot crack filler, you should use a high temp rated silicone squeegee blade. If you're doing cold pour only, black is fine. If you're doing both hot and cold, you can't go wrong with the red.

You are here

Shipping Weight
Weight: 1 lb
Shipping Dimensions
Dimensions: 12 in × 3 in × 3 in