You are here

Iwaki Air 1 Inch Sealcoating Pump For One Wand Spraying - TC-X253AN-NPT

2023 Notice: While supply chain problems are better than last year, we anticipate them to continue for 2023. Please expect some delays. view details

Representative overview image of the Iwaki Air 1" stainless steel pump
MPN: 
TC-X253AN-NPT
SKU: TC-X253AN-NPT
Iwaki Air 1" AODD Aluminum Pump
List price: $899
$799
Free Shipping to lower US 48
 
Availability: 
In Stock
Quick Overview: 
  • 1" Aluminum Dual Diaphragm Pump
  • Perfect for small sealcoating rigs
  • 1-year limited warranty
  • Up to 58 GPM
  • Air Powered (air source sold separately)

Description

Need a great sealcoating pump for spraying with a single wand? If you're in the market for a great beginner diaphragm pump that won't break your budget and you won't be doing medium or big jobs, this is a great pump to start out with.

The Iwaki Air 1" air-operated dual diaphragm (AODD) pump is great for small sealcoating setups where a smaller tank, smaller compressor, and a smaller footprint are needed.  We offer the Iwaki Air pumps as an alternative to the comparable Yamada pumps that come standard on our sealcoating spray systems.

Designed and made in Japan for over 50 years by the well-known YTS Pumps, Iwaki Air is the brand of YTS Pumps used to identify their air-operated pumps.

With the part number: TC-X253AN-NPT, you get a 1" aluminum body (NPTF), aluminum manifold, and aluminum seat material with the Buna-N ball and diaphragm material.

1" pumps are perfect for single operation sealcoaters who need a good flow and strong pump but aren't out there running their sealcoating rig on huge jobs.  These pumps are perfect for driveways and small parking lots however we recommend stepping up to the 1.5" Iwaki Air pump if you plan on doing medium to large parking lots.

The biggest difference between the 1" and larger pumps, is the number of times the pump has to cycle to output the same amount of material.  This is why we only recommend the 1" as a single wand unit because it can't handle larger material requirements.

Compressor Recommendations

For the most part, you'll want an air compressor that can handle between 15 - 20 CFM in order to get you between 6-9 GPM @ 85-90 PSI input. This is plenty of flow considering most guys using a 1" pump will run with the 80/40 or 80/50 tip which cuts your output flow down to 4.0 GPM or 5.0 GPM respectively.

Warranty

1 Year Limited

This product comes with a 1 year (12 month) limited warranty from the time of purchase.

Parts that are not explicitly made by this manufacturer, may come with a different warranty period or policy. See this products respective operations manual for a detailed version of the warranty policy and a full list of items that are covered or may become void due to improper maintenance.

You Might Like

Specifications

General

Type

Pneumatic (AODD)

Intake & Discharge Size

1" Female NPT

Wet Side Material

Aluminum

Air Side Material

GFRPP (Glass Reinforced Polypropylene)

Diaphragm Material

Buna N

Air Supply Pressure

30-100 PSI (0.2-0.7 MPa)

Max Output Flow

58 GPM (water)

Minimum Compressor

Approx 10 CFM @ 90 PSI

Sealer Types

Water Based

Yes (asphalt emulsion, coal tar, etc)

Solvent Based

No (gilsonite)

Abbrasives

Yes (sand, coal slag, slate, etc)

Unit Specifications

Dimensions

10"L x 13.9"W x 12.9"H

Weight

24.3lbs (11kg)

Documents

Manual:

Compare Similar Products

Iwaki Air 1" AODD Aluminum Pump Yamada 1" Aluminum AODD Pump
$799 $989
Representative overview image of the Iwaki Air 1" stainless steel pump Front right of the Yamada 1" dual diaphragm pneumatic pump
TC-X253AN-NPT NDP-25BAN
General

Type

Pneumatic (AODD)

Intake & Discharge Size

1" Female NPT

Wet Side Material

Aluminum

Air Side Material

GFRPP (Glass Reinforced Polypropylene)

Diaphragm Material

Buna N

Air Supply Pressure

30-100 PSI (0.2-0.7 MPa)

Max Output Flow

58 GPM (water)

Minimum Compressor

Approx 10 CFM @ 90 PSI

Sealer Types

Water Based

Yes (asphalt emulsion, coal tar, etc)

Solvent Based

No (gilsonite)

Abbrasives

Yes (sand, coal slag, slate, etc)

Unit Specifications

Dimensions

10"L x 13.9"W x 12.9"H

Weight

24.3lbs (11kg)

General

Type

Pneumatic (AODD)

Intake & Discharge Size

1" Female NPT

Wet Side Material

Aluminum

Air Side Material

Aluminum

Diaphragm Material

Buna N

Air Supply Pressure

20 - 100 PSI (1.4–7 kfg /cm)

Max Output Flow

49 GPM (water)

Minimum Compressor

Approx 10 CFM @ 90 PSI

Sealer Types

Water Based

Yes (asphalt emulsion, coal tar, etc)

Solvent Based

No (gilsonite)

Abbrasives

Yes (sand, coal slag, slate, etc)

Unit Specifications

Dimensions

11.30"W x 15.08"H

Net Weight

27 lbs. (13.0 kg)

You are here

Shipping Weight
Weight: 28 lb
Shipping Dimensions
Dimensions: 16 in × 16 in × 18 in