Asphalt Sealcoating Machine PolySkidPlus 525
Our PolySkidPlus 525 asphalt sealcoating machine is possibly the best value available anywhere for a system that has so many standard features. This system is similar to our PolySkid Super but we have added several features to this sealcoating machine making it a full featured spray system, but costing thousands of dollars less than our competitors similar machines.
This asphalt Sealcoating Machine utilizes our 525 gallon molded 1/4" thick polyethylene tank, which is banded and bolted into a full steel skid offering you maximum stability and anti tip safety. Our research tells us that Polyethylene is easier to clean than steel tanks because the tank repels the sealcoat liquid and it will not stick like it would to a steel tank.
These sealcoating machines are also lighter, they will not rust and cost less to purchase making them very appealing to the professional Sealcoater who wants the professional look and functionality but is interested in saving money on his equipment.
You will find our Hydraulic Agitation system on this sealcoating machine, which consists of our exclusive offset three paddle rake design and thoroughly mixes your sealer.
The agitation on this sealcoating machine is full sweep offering the operator forward, reverse and neutral all controlled form the hydraulic agitation valve. The agitation drive shaft is 1-1/4" and is housed with two flange bearings that have grease zerks included.
The hydraulic pump is ran from our 8 HP Honda GX industrial engine which also runs the air system for the 1-1/2" Yamada Diaphragm Pump* delivering up to 150PSI of constant spray pressure on this asphalt sealcoating machine.
With this sealcoating machine kit, you will receive 100' of 250PSI spray hose along with our Cox manual hose reel and our deluxe 6' x 3/4" aluminum spray wand including one 80/40 tip and brass shut-off valve.
Our air system is powered by a Puma / Honda 8 gallon system that includes a three cylinder pump offering pressures up to 150 PSI and 20 CFM and includes an electric starter with battery.
We use a large strainer and basket allowing the operator to run longer cycles without stopping for basket cleaning and we mount a 22" steel "Double Splash Lid" man hole on the tank for easy access to the tank interior allowing for easy cleaning and service.
As you can tell, this Sealcoating Machine includes all of the great features you need and expect but offers you the opportunity to own a Full Featured System at a price you can afford without compromising quality and features.
This system is also available as our smaller 325 Plus Sealcoating Machine if you need a smaller system.
TANK CAPACITY: 525 Gallons
TANK MATERIAL: Polyethylene
TANK THICKNESS: 1/4"
MANWAY SIZE: 22ʺ Steel Square
HAND AGITATION: No
PUMP AGITATION: No
HYDRAULIC AGITATION: Yes
MECHANICAL AGITATION: (Optional - Call)
STANDARD ENGINE: 5.5hp Honda GX
STANDARD PUMP SIZE: 1.5" Yamada Diaphram
- STANDARD PUMP HOUSING: Aluminum
- STANDARD PUMP TYPE: "Buna N" Diaphram
UPGRADE ENGINE: N/A
UPGRADE PUMP: N/A
- UPGRADE PUMP HOUSING: N/A
- UPGRADE PUMP TYPE: N/A
ENGINE FUEL: Unleaded
PUMPS SAND: Yes
SPRAYS COAL TAR: Yes
SPRAYS ASPHALT EMULSION: Yes
STANDARD HOSE REEL: Cox 100' Manual
UPGRADE HOSE REEL: Cox 100' Electric
SPRAY PRESSURE: Max 150 PSI
STRAINER: 1.5 gallon steel
HOSE LENGTH: 100'
HOSE DIAMETER: ID 3/4"
HOSE RATING: 250 PSI
INCLUDES SPRAY WAND: Yes
DIMENSIONS: 121"L x 55"W x 57"H
EMPTY WEIGHT: 1200 lbs
*EST. FULL WEIGHT: 6,713 lbs
*Estimated full weight based on an average 10.5 lbs per gallon of undiluted sealer without sand additives. Includes empty weight.
Durable 1/4" Thick Poly Tank
1-1/4" Thick Agitation Shaft
8 HP Honda GX Industrial Engine
Full Sweep Agitation
100' of 250PSI Good Year Spray Hose
Cox Hose Reel
Deluxe 6'X 3/4" Aluminum Spray Wand Including one 80/40 Tip And Brass Shut-Off Valve
11/64" Steel Strainer Basket
Rubber Agitation Paddles
Electric Hose Reel
|Spray Tip Replacements (Qty 3)||$25.99|
|3/4" 250 PSI Sealcoating Hose||$1.97|
|6' Sealcoat Spray Wand Replacement||$119|
|5.5 HP Honda Industrial Engine||$389|
|2" PolySkid "Y" Strainer & Housing (Camlock Cap Style)||$99|