Asphalt Sealcoating Machine PolySkidPlus 325 Gallon Tank
This is the smaller version of our PolySkidPlus 525 asphalt seal coating machine and includes all of the same features with the exception of the tank capacity.
It's easier than ever to afford a Sealcoating Machine System that has all of the features that you want and need including our three paddle full sweep hydraulic agitation system.
Our research shows that sealcoat emulsion and coal tar will not stick to the Poly tank as severely as a steel tank and we mount the tank into a full steel skid, banding it with two large bands that are then bolted to the skid. This creates a sealcoating machine that is easily bolted to your vehicle and creates excellent "Anti Tip" stability.
Our Honda Puma, electric start air compressor with 12 volt battery will easily power the 1-1/2" dual diaphragm Yamada Pump that delivers up to 150 PSI and 20 CFM of constant spray pressure.
Our hydraulic agitation system includes a 5 gallon hydraulic tank with filter and control valve allowing forward and reverse with neutral positions for ease of use on this sealcoating machine.
Our PolySkidPlus 325 Sealcoating Machine also comes standard with 100' Cox Hose Reel wrapped with 100' of 250PSI spray hose and our deluxe 6' X 3/4" spray wand with one 80/40 tip and brass ball valve.
The tank lid is constructed from steel, has a 22" square and has a double splash lid making it easy to access the tank interior for servicing and cleaning.
We use a large capacity strainer allowing the operator to operate the system longer between basket cleaning.
When you compare features and cost, it's hard to beat the value and price of this Hydraulic Seal Coating Machine.
TANK CAPACITY: 325 Gallons
TANK MATERIAL: Polyethylene
TANK THICKNESS: 1/4"
MANWAY SIZE: 16" Screw-On (Round)
HAND AGITATION: No
PUMP AGITATION: No
HYDRAULIC AGITATION: Yes
MECHANICAL AGITATION: N/A
STANDARD ENGINE: 8hp Honda GX (Electric Start)
STANDARD PUMP SIZE: 1.5" Yamada Diaphram
- STANDARD PUMP HOUSING: Aluminum
- STANDARD PUMP TYPE: "Buna N" Diaphram
UPGRADE ENGINE: N/A
UPGRADE PUMP: N/A
- UPGRADE PUMP HOUSING: N/A
- UPGRADE PUMP TYPE: N/A
ENGINE FUEL: Unleaded
PUMPS SAND: Yes
SPRAYS COAL TAR: Yes
SPRAYS ASPHALT EMULSION: Yes
STANDARD HOSE REEL: Cox 100' Manual
UPGRADE HOSE REEL: Cox 100' Electric
SPRAY PRESSURE: Max 150 PSI
STRAINER: 1.5 gallon steel
HOSE LENGTH: 100'
HOSE DIAMETER: ID 3/4"
HOSE RATING: 250 PSI
INCLUDES SPRAY WAND: Yes
DIMENSIONS: 117"L x 42"W x 53"H
EMPTY WEIGHT: 1000 lbs
*EST. FULL WEIGHT: 4,413 lbs
*Estimated full weight based on an average 10.5 lbs per gallon of undiluted sealer without sand additives. Includes empty weight.
Non Stick Polyethylene Tank
Cox Manual Hose Reel
Large Industrial Strainer With 11/64" Basket
Compensation Hydraulic Flow Control
Forward And Reverse Hydraulic Power Agitation
Brass Ball Valves
12 Volt Heavy Duty Battery
8 HP Honda GX with 8 Gallon Puma Air system 20 CFM/150PSI
Hydraulic Tank Capacity: 5 Gallon
Electric Hose Reel
Rubber Agitation Paddles