You are here

QUIK JOINT 1 Inch Asphalt Crack Repair Tape

2023 Notice: While supply chain problems are better than last year, we anticipate them to continue for 2023. Please expect some delays. view details

image: Roll of 1" QuikJoint Asphalt Crack Tape in front of bucket
image: 16 Rolls of 1" QuikJoint Asphalt Crack Repair Tape
image: Quik Joint Crack Repair Tape Application
image: QuikJoint Crack Tape Installation
image: QuikJoint Crack Tape Melting
image: QuikJoint Crack Tape Finished
MPN: 
3QJ1
SKU: QJ1160
QUIK JOINT 1" Asphalt Crack Repair Tape
List price: $279
$227
Free Shipping to lower US 48
 
Availability: 
In Stock
Quick Overview: 
  • 800 feet @ 1" width
  • Easy to apply and lasts for several years
  • Stops moisture and dirt from penetrating the crack
  • 1" width is perfect for hairline cracks

Description

RUBBERIZED NON-TRACKING JOINT AND CRACK SEALING TAPE FOR ASPHALT OR CONCRETE 1" width

Looking for bulk quantities you can save money on?  Check out our pallet option of 1" QuikJoint or you can also choose a single roll instead of a bucket.

QUIK-JOINT is an innovative roll-out cold applied sealant that creates a durable, watertight and elastic seal after being heat-bonded to the pavement surface. Its specially-blended, high-tack rubberized asphalt compound is compatible with all common pavement surfaces. Equal or better in quality, appearance, and durability to regular hot applied sealers at a fraction of the cost. Quick and easy for only one person to apply. Saves time and money by eliminating the expense and manpower associated with hot tar kettles and related paraphernalia.

1" QUIK JOINT - Great for small repairs to hairline cracks no larger than 1/8" wide.
2" QUIK JOINT - Perfect for cracks between 1/8" and 3/4" wide.
4" QUIK JOINT - Used for large crack spans no wider than 1-3/4", or cracks that are exposed to higher traffic volumes.
8" QUIK SEAM - Ideal for huge spans up to 8" in width.

Installation is super easy.  Simply pull the white paper wax backing off the bottom, face the plastic residue side up, push firmly into the ground and then evenly heat with a propane torch until the material liquifies.  Allow the material to cool for 5 - 10 min and maybe sprinkle some sand over it before allowing traffic.  Sand is up-to-you.  Allow it to cool and cure a bit longer if you don't sprinkle sand on it.

Details & Application Instructions

Features

  • Applies easily with a propane torch

  • Expands and contracts with the pavement

  • Easy to use for a home owner, tough enough for pros

  • Keeps your asphalt looking new

You Might Like

Specifications

General

Shipped Volume

16 rolls

Total Length

800'

Color

Black

Individual Roll Specs

Length

50'

Width

1"

Thickness

3/32" (.093")

Instructions Overview

Directions

Pavement must be clean, dry and free of dust prior to application of QuikJoint over-banding compound. Desired pavement temperature should be 40º F (4.4ºC) and rising. Heat may be applied directly to pavement to dry and warm surface area to increase adhesion. For best results fill cracks wider than 1/16 inch with an approved crack filler level with pavement surface.

1. Peel and Separate approximately one foot of the white release paper from the over-banding joint compound.

2. Position and Press the exposed compound (underside) at the front of the joint to be sealed and adhere to the pavement by applying pressure. Continue to separate the white release liner while rolling, positioning and pressing the compound over the entire joint to be sealed. Once the entire work area has been covered; cut the the material with a straight edge and return roll to its original package.  (It is not necessary to remove the clear plastic film on the topside of the material).

3. Apply heat directly to the product (the clear plastic film will burn off) using a propane torch (suggested 2” diameter torch head or larger). Constantly and repeatedly move flame over the compound material until liquefaction occurs (this will happen almost immediately). The material must be heated so that all the clear plastic has been melted and the compound is liquefied (melted) and bonded to the surface. Do not apply excessive heat causing the materials to burn or run off.

The material will set up quickly and the joint is permanently sealed . Within minutes the area may be top coated with sand or sealer or opened for traffic. Properly dispose of any waste materials.

Warning

A torch head will remain hot for sometime after usage, do not allow it to come into contact with body.

Note

QuikJoint is an over banding material fabricated and manufactured to seal pavement joints. It is not designed to bridge cracks or act as a structural membrane. When used to over band cracks; the cracks shall be filled prior to applying QuikJoint. Cracks may be filled using QuikFill or other approved crack fillers. An optional method is to cut strips of QuikJoint and position these strips over the crack to be filled and apply heat to flow material into the opening. Fill crack to surface level with approved crack filler. Proceed to over band the crack by following the above directions one through three.

Storage

QuikJoint must be stored indoors at temperatures not to exceed 120º F (48.89º C). When re-packaging the roll take caution to use the glossy dividers provided to keep rolls separated from each other and any other materials.

 

Documents

Material and Safey Data Sheets (MSDS/SDS):
Technical Data Sheet:

Compare Similar Products

QUIK JOINT 1" Asphalt Crack Repair Tape QUIK JOINT 2" Asphalt Crack Repair Tape QUIK JOINT 4" Asphalt Crack Repair Tape
$227 $209 $197
image: Roll of 1" QuikJoint Asphalt Crack Tape in front of bucket image: Roll of 2" QuikJoint Asphalt Crack Tape in front of bucket image: Roll of 4" QuikJoint Asphalt Crack Tape in front of bucket
QJ1160 QJ2800 QJ4400
General

Shipped Volume

16 rolls

Total Length

800'

Color

Black

Individual Roll Specs

Length

50'

Width

1"

Thickness

3/32" (.093")

General

Shipped Volume

8 rolls

Total Length

400'

Color

Black

Individual Roll Specs

Length

50'

Width

2"

Thickness

3/32" (.093")

General

Shipped Volume

4 rolls

Total Length

200'

Color

Black

Individual Roll Specs

Length

50'

Width

4"

Thickness

3/32" (.093")

You are here

Shipping Weight
Weight: 40 lb
Shipping Dimensions
Dimensions: 16 in × 16 in × 18 in