Cold Rubberized Asphalt Crackfiller 5 gallons
Asphalt Crack Filler is easy to use and offers professional results
Click on the Pictures to the Right to Enlarge ->>>
This Professional grade Asphalt Crack Filler comes ready to use in 1 gallon, 5 gallon and 55 gallon containers and is a professional grade pourable, high performance, black, rubberized asphalt emulsion-based crack sealer.
It is extremely important to repair cracks in your asphalt pavement year around to keep water, oils and vegetation from getting into the cracks and causing further damage.
The problem here is that the Home Owner and Do-It-Your-Selfer does not have access to Professional Grade Pavement Products so they resort to "Big Box Hardware Store" products (Which are better than nothing) but not buy much!
Even though these cheaper products are readily accessible to consumers, they simply do not last as long or work as good as the products that the Asphalt Driveway Repair professional uses. His products are purchased from a wholesale supply house that specializes in supplying professional products to Asphalt Repair Contractors.
At Asphalt Sealcoating Direct, we specialize in supplying these Professional Grade Products to the professional but also to the consumer because we know and understand that some of you want to perform your own Asphalt Driveway Repair.
It's not difficult to repair cracks with our Cold Asphalt Crack Filler but the preparation is very important. First and foremost make sure the crack is clean and dry. The prepared crack should be no deeper that 1/2" and it will need pre-filling with sand or Backer Rod before the crackfilling process begins.
This product is ideal for filling cracks up to ½" wide in any asphalt or concrete surface. It dries to a black rubber-hard consistency, providing a crack-free, water resistant surface prior to application of pavement sealer.
Application: Clean dust, dirt, or loose material from the cracks. Pour Asphalt Crack Filler into the crack slowly allowing the crack to completely fill but not overfilling.
Use a Crack Squeegee to clean off any excess crackfiller flush with the surface.
Broadcasting dry sand over freshly sealed cracks is an option which will dull the shiny finish of the new crack filler.
Allow the new Crackfiller to dry, which could take 4 to 6 hours depending on the outdoor temperature.
Caution: Do not apply below 50 F. Do not use when rain is imminent. Do not use in cracks over ½" wide. (For cracks over ½" wide we recommend you use our Alligator Asphalt Compound.
No special tools are required when using our Cold Asphalt Crack Filler however a small investment in the proper Asphalt Tools will make your job much easier and deliver professional results.
Specifications:
- Type - Asphalt Emulsion
- Color - Black
- Weight per Gallon(approx)- 9.3 lbs
- Drying time: (approx)
- To touch - 15 minutes
- For traffic - 6 daylight hours
- Viscosity at 80F
- (ASTM D-562) - 95-105 KU
- Percent Solids by Weight - 69-74%
- Water Resistance - Excellent
- 1 gallon fills 200-225 linear feet of 1/4" x 1/4" cracks.
Coverage:
*We also have 55 gallon drums available.
Please call us at 1-800-689-2098 for additional application information, MSDS sheets and quantity discounts.
